Due to the permanently high humidity in the bathroom or particularly hard water, unsightly deposits settle on the joints, which provide an ideal breeding ground for mold. And the tiles in the kitchen are not safe from unsightly deposits either: Here it is primarily grease and dirt residues that collect in the gaps when cooking. Unfortunately, these processes cannot be stopped, no matter in which room - but you can still clean the yellowed joints: either with a special cleaner or alternative (household) means. We'll tell you what they are.
A commercial grout cleaner usually contains basic and fat-dissolving ingredients to remove dirt residue, oily deposits, soap residue and - depending on the manufacturer - mold from the gaps. To do this, the agent must be sprayed directly onto the joints and left to act for several minutes (depending on the degree of soiling). The gaps should then be reworked with a sponge, cloth or brush to remove stubborn dirt. At the end, the joints are rinsed with fresh water and the entire process is repeated if the result is not satisfactory.
Toothbrushes are often misused to clean the joints. Their small bristles fit perfectly into the gaps and can therefore reach all deposits - however, the effort is enormous if you want to clean an entire tiled area. Distributing a grout cleaner is much easier with a special grout brush: it has more bristles than a toothbrush, is significantly larger and usually has a practical handle - like this model. Alternatively, you can also use the so-called Fugentorpedo, a special cleaning system that became known through the start-up show "Die Höhle der Löwen".
And this is how the cleaning system works: The use of industrial diamonds, which act as abrasives, is intended to remove superficial and deep-seated dirt from the gaps. How this looks in practice is explained in the following instructions.
Steam cleaners Stubborn dirt can be removed from the joints with hot steam. To use this method, you need a steam cleaner that you can operate by hand and thus treat individual joints selectively.
Dirt eraserThe fine-pored sponge is actually used to treat stains on the walls, but can also be used as a grout cleaner - at least for slight discolouration in the gaps.
Scouring milkAs the name suggests, this cleaning agent is used for scouring. This makes it easier to remove stubborn encrustations with the small polishing particles, including those that form in the joints.
Important note: Vinegar is a tried and tested household remedy that is often used as a grout cleaner. Note, however, that not all surfaces tolerate the acid - such as grout. The calcareous material would be attacked by the vinegar and become porous. For silicone joints, on the other hand, vinegar is very suitable for removing mold.
This article contains so-called affiliate links. Further information are available here.